Characteristics
• Electrowelded mesh manufactured by means of fully automated processes, resulting in excellent dimensional stabilityl.
• The contact welding process used provides clean connections, with no burrs or excessive material.
• Different grid dimensions depending on required enclosures and strength levels.
• Manufactured in black, with no anti-corrosive treatment; pre-galvanized, manufactured using pre-galvanized wires; and post-galvanized for better durability.
• Horizontal panel sides are edge-free and wrapped by end wires. Vertical ends have longitudinal wire tips ranging between 23 to 30 mm.
• Meshes built with wires of up to 50 kg/mm2 in resistance.
Presentation and packaging.
• Electrowelded mesh panels are presented in plastic-strapped packages prepared for forklift or crane lifting (50 units).
• On request and after quote, a wooden block can be fitted on the lower part of each package to facilitate handling and improve isolation.

Manufacturing dimensions of the standard program
Diameter 4 | Diameter 5 | |||
Grid (mm) | Dimensions (mm) | Grid (mm) | Dimensions (mm) | |
50 x 50 50 x 100 |
2600 x 1000 | 50 x 50 50 x 100 |
2600 x 1000 | |
2600 x 1500 | 2600 x 1500 | |||
2600 x 1800 | 2600 x 1800 | |||
2600 x 2000 | 2600 x 2000 | |||
2000 x 1000 | 3000 x 2000 | |||
3000 x 1500 | 50 x 150 | 2600 x 1500 | ||
3000 x 2000 | 2600 x 1800 | |||
50 x 150 | 2600 x 1500 | 50 x 200 | 2600 x 1500 | |
2600 x 1800 | 2600 x 1800 | |||
30 x 30 | 2000 x 1000 | 50 x 300 | 2600 x 1500 | |
2600 x 1000 | 2600 x 1800 | |||
Manufactured in other dimensions on request. / * For finishes in gray and pre-galvanized. |